Bresser Researcher ICD Bedienungsanleitung PDF herunterladen (Seite 8)

All parts (Fig. 1-7):

B Eyepieces

C Dioptre scale

D Binocular head

E Focus wheel

F Objective holder with objective lenses

G Dust protective cover

H Electric illumination (Reflection/Transmission)

I Microscope stage

J Object clips

1) Power supply connection

1! Main switch

1@ Dimmer

1# Cover plate

1$ Source switch

1% Illumination housing

1^ Rechargeable batteries

1& Eyepiece clamp screw

1* Friction adjustment

1( Wrench to adjust the friction

1. Choosing a place for the microscope

Before starting, choose a sufficient location for microscoping. Please take care that your

microscope stands on an even and solid ground. A power supply socket is required to charge the

batteries.

2. Illumination

With the Researcher ICD, you have three illumination options: incident light, transmission light and

both. First, connect the power supply to a power supply socket and then into the power supply

connection of the microscope (10). Now, engage the main switch (11). With the source switch

(14), you can adjust the illumination type: Pos. I for incident light, pos. II for transmission light, pos.

III for both. At position 0, both lamps are off. With the dimmer (12), one can adjust the brightness.

3. Observation

First, remove the dust protective cover (6) from the objective holder (5). Place the desired object

in the middle of the stage (8) and secure it with the clamps (9) if necessary. The objective’s

magnification (2x or 4x) can be adjusted by turning the objective holder (5). It is recommended to

start observations always with the lowest magnification. Now look through the eyepieces (1) at the

binocular head (3). Adjust the sharpness with the focuser (4).

- 8 -

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Keine Kommentare

Bresser Researcher ICD Bedienungsanleitung Seite 8